Close

Results 1 to 4 of 4
  1. #1

    Default Immortal guide spacing

    Greetings

    Iím looking for the immf1338-4 guide spacing

    Thx

  2. #2
    Join Date
    Sep 2016
    Location
    Coon Bay, WA
    Posts
    107

    Default

    Try this. Remember these blueprints are to get you close and we always advise you to do static testing.

    Name:  IMMF1338-4.jpg
Views: 312
Size:  57.7 KB

    Regards,
    Eric
    Attached Images Attached Images  

  3. #3

    Default

    Thx Eric.
    Just wondering why the tiptop size recommendation is 5.5 and the spec for that blank id 5.0? Is it a general rule of thumb to go 1/2 point bigger?

    Cheers,

    Arnaud

  4. #4
    Join Date
    Sep 2016
    Location
    Coon Bay, WA
    Posts
    107

    Default

    General rule is next size up.

    Tip tops are measured in 1/64" increments.

    In your case, it is recommended to use a 5.5 tip top which is 5.5/64" or .086"

    You wouldn't want to use the exact same size as you have to account for the taper to seat the tip top.

    Regards,
    Eric

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •