Close

Results 1 to 3 of 3
  1. #1

    Default Etef908 guide spacing.

    Building a sea trout/salmon rod and would like to see the Batson blueprints for that one.
    Thank you.

    FISK Norway.

  2. #2
    Join Date
    Sep 2016
    Location
    Coon Bay, WA
    Posts
    57

    Default

    FISK Norway,

    Here is a draft blueprint. Please bear in mind that the reason that this is not an approved and posted blueprint is that this BP was done on initial sample rods so measurements could be off a bit Tip Top and Winding checks are the main areas where measurements are possibly off. But for guide layout should be a good starting point. Recommend that you temporarily set your guides with tape or zipties and then do a static test to get your optimum spacing under load.

    Let us know how the build goes and post pics.

    Regards,
    Eric

    ETEF908-4CB.pdf

  3. #3

    Default

    Thank you, went with a lineup very close to this.
    Rod showcased in gallery.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •